Product Description
Sawdust Dryer Wood Drying Machine for Drying Wood Chips and Bark
The wood drying machine is designed and manufactured specifically for drying sawdust, small wood chips, and bark. It features a large drying capacity, significant energy-saving effects, and low maintenance. The main components include an air heater, feeder, airflow drying pipe, cyclone separator, and fan.
The wood drying machine uses homemade combustible gas as the heating source. The drying process consists of two parts: the drum section and the serpentines tube section. The drum section includes an inner drum and an outer moisturizing layer. The inner drum is equipped with three internal helical blades, allowing the drying material to move uniformly, known as stir-frying heating. The serpentines tube section reuses the heat source, and a negative pressure induced by the air blower is used to draw the drying material into the spiral separator for separation, achieving the drying effect.
Features of Dryer:
1. Utilizing a three-zone (high-temperature zone, medium-temperature zone, and low-temperature zone) drying mode. The high-temperature zone is primarily for heating the material, the medium-temperature zone involves substantial evaporation of water vapor, and the low-temperature zone automatically cools down and further evaporates water vapor.
2. 'N' layered structure design, with minimal heat dissipation, high heat transfer efficiency, and more conducive to the drying of materials.
3. Special lifting and spreading devices to enhance the efficiency of material and gas exchange.
4. The transmission device adopts independent gear transmission, with a compact structure that avoids slipping; installation and maintenance are more straightforward, ensuring higher stability.
5. Utilizing variable frequency speed regulation to adjust the drum speed and an automatic temperature monitoring system.
6. Optimized structural design and wear-resistant treatment ensure the equipment's service life.
Drying machine working principle:
Wood chips enter the wood chip dryer and, through the combined action of the spraying pipe and the rotary drum, the material boils and fluidizes inside the drum. The hot air comes into full contact with the material, completing the drying process.
Product Parameters
| Drum Dryer for Sawdust |
| Model |
Specification
(Meter) |
Drum diameter
(mm) |
Duct diameter
(mm) |
Main engine power
(kw) |
Fan power
(kw) |
Voltage (V) |
Capacity |
Dimension |
Weight |
Remarks |
| |
(L*W*H) mm |
(T) |
| HG1010 |
D1.0*L10 |
1020 |
400 |
3*2 |
22 |
380 |
0.8-1.5T/H |
10000X1500X1350 |
7.6 |
Raw material moisture content 35-40%. |
| HG1212 |
D1.2*L12 |
1200 |
460 |
4*2 |
22 |
380 |
1-2T/H |
12000X1800X1600 |
9.8 |
| HG1615 |
D1.6*L15 |
1600 |
600 |
11 |
37 |
380 |
1.5-3T/H |
16000X2000X1950 |
17.8 |
| HG1816 |
D1.8*L16 |
1800 |
700 |
11 |
55 |
380 |
2.5-4T/H |
16000X2200X2250 |
23.9 |
| HG2016 |
D2.0*L16 |
2000 |
800 |
15 |
55 |
380 |
3.5-5T/H |
16000X2500X2850 |
28.5 |
| HG2418 |
D2.4*L18 |
2400 |
800 |
22 |
90 |
380 |
4.5-7T/H |
18000X3000X3200 |
36.8 |
Detailed Photos
Packaging & Shipping
Packing: wooden case+container
Shipping: By truck, by rail or by sea.
FAQ
1.Can I purchase products which are not shown on the website?
Yes. Please send us your detailed requirements and we will try to help with your specific needs.
2.How can I place an order?
You can contact us by email (see contact page).
3.Where do you loading the goods?
Shanghai or Ningbo or Qingdao or Shenzhen port, etc.
4.How to make payment?
You can pay us by Paypal, L/C ,T/T and West Union,etc.
5.What is the type of our transportation?
As your requirement, by express, truck, rail, by sea or by air.
6.Can you offer the customers product sample?
Yes .After receiving your inquiry , we will arrange to send the sample within 3 days.
7.How do you pack the goods ?
According to customer's request.
8.What is your payment terms?
FOB Shenzhen, Guangzhou, Qingdao, Shanghai /Ningbo or other city in China , Or CIF Destination.
9.Can you also offer the service with OEM and ODM ?
Yes. We can offer OEM/ODM service. Please send us your brand information and specification.
10.How long is the warranty of your products ?
Generally, it's one-year-warranty. During the warranty period, we offer you free maintenance.
After the warranty time, lower price for customers buying breakdown parts.
Audited Supplier 
){kind=link}