Product Description
Three Point Caliper for Oil Field Drilling Bits and Oil Pipelines Measuring tripod gauge
Three point caliper for measuring the outer diameter of oil field drilling bits and oil pipelines.
The product material is made of high carbon steel, and the main measuring range and claws can be supplied according to customer special requirements, can be customized according to drawings or samples.
The three-point calipers are divided into six specifications: 80-130mm, 130-230mm, 230-350mm, 350-480mm, 480-750mm,750-1050mm, with a graduation value of 0.02mm or 0.05mm.
The three-point caliper is a measuring tool that uses mathematical edge and angle function theory, as well as the principle of vernier reading, to directly measure the readings of circular body components, oilfield drilling bits, oil pipeline outer diameter, and three wing centralizers.
We can supply metric one, dual scale in metric and inch size one according to customer's requirements.
Product Parameters
Technical parameters
| Product name |
Measuring range |
graduation |
Three point caliper |
80-130mm |
0.02mm or 0.05mm |
| 130-230mm |
0.02mm or 0.05mm |
| 230-350mm |
0.02mm or 0.05mm |
| 350-480mm |
0.02mm or 0.05mm |
| 480-750mm |
0.02mm or 0.05mm |
| 750-1050mm |
0.02mm or 0.05mm |
Installation Instructions
Usage method
According to the measured outer diameter, apply a three-point caliper that is suitable for the specification. Place the missing part in the three measuring surfaces of the three-point caliper, so that the complete circular part of the measured part is in ideal contact with the measuring surface. The circular diameter size can be directly read on the measuring ruler and vernier.
Matters needing attention
1. Keep the measuring tool body clean and free of dirt, prohibit contact with corrosive objects, and apply anti rust oil after use.
2. During use, it should be handled with care and there should be no strong impact.
We can supply metric one, dual scale in metric and inch size one according to customer's requirements.
Operation instruction:
Before using, loose the screw and then undraw the frame smoothly. clear the measure side and guide side by cotton fabric.
Check the zero point: push the frame forward slowly to make the outside claw two side edges match well. The Zero point
matches the end scale. During measuring, push or pull slowly and smoothly.
to make the tool touch the subject well, not too tight(better 4-6N).When read the scale, the eyesight should be straight avoid inaccuracy.
Reading method: when measures the outside diameter, adjust the tool against the object, put the object into the 3 measure planes to make sure the object touch well with the tool measure side so that the scale will be read.
Detailed Photos
Packaging & Shipping
Packing: 1pc in a wooden case.
Shipping: By express, by air, by sea, by truck or by rail.
FAQ
1.Can I purchase products which are not shown on the website?
Yes. Please send us your detailed requirements and we will try to help with your specific needs.
2.How can I place an order?
You can contact us by email (see contact page).
3.Where do you loading the goods?
Shanghai or Ningbo or Qingdao or Shenzhen port, etc.
4.How to make payment?
You can pay us by Paypal, L/C ,T/T and West Union,etc.
5.What is the type of our transportation?
As your requirement, by express, truck, rail, by sea or by air.
6.Can you offer the customers product sample?
Yes .After receiving your inquiry , we will arrange to send the sample within 3 days.
7.How do you pack the goods ?
According to customer's request.
8.What is your payment terms?
FOB Shenzhen, Guangzhou, Qingdao, Shanghai /Ningbo or other city in China , Or CIF Destination.
9.Can you also offer the service with OEM and ODM ?
Yes. We can offer OEM/ODM service. Please send us your brand information and specification.
10.How long is the warranty of your products ?
Generally, it's one-year-warranty. During the warranty period, we offer you free maintenance.
After the warranty time, lower price for customers buying breakdown parts.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}